Magnetic Fluid Filter Housing

Model: JTGCX

Brand: JHENTEN

Fluid Pipe De-Ironing Separator

Detail Description

JTGCX Magnetic Fluid Filter Housing is applied to the fluid, semifluid and other different viscous fluid materials, remove the iron impurities and other ferromagnetic particles. To keep the material clean and protect the downstream production equipment at the same time.

JTGCX Magnetic Fluid Filter Housing using multichannel polishing processing to ensure the interface surface roughness Ra≤0.4um,compliance with GMP/FDA requirement . All of the surface is mirror polished.

Feature
Barrel's internal and external surface using mirror polish, interface surface roughness Ra≤0.4um,compliance with GMP/FDA requirement .
Using Flange, quick-open, eyebolt plate or quick release clamp can easy to install, take out and clean magnetic component.
Reasonable structure design can ensure the best de-ferrous effect at the same time not impede the flow of the material.

Application

Used in food and beverage, metal processing, pharmaceutical, ceramics, paper, cosmetics, fine chemical industry, etc. To protect main equipment from the destruction of the iron particles

Surface Finish

Finish Type	Mechanical polishing, electrolyticpolishing, sand blasting, pickling
Polishing precision	Inner surface Ra≤0.6μm , Outside surface Ra≤0.8μm.

Operating Conditions

Max Operating Pressure	0.6MPa, 1.0MPa
Max Operating Temp.	150℃

Material

Filter shell	304, 316L
O-ring	EPDM, PTFE, Viton, Silicone

Connection

Shell connection	Tri-clamp(0.6MPa), Flange(1.0MPa)
In-outlet N1, N2	Flange, Tri-clamp, Thread

Structure

JTGCX A series JTGCX B series

JTGCX C series JTGCX D series JTGCX E series

Dimension Parameters

Diameter	Qty.of magnet	In-outlet	Magneticbar
			Diameter	Length
Φ50	1	1”/1.5”	Φ20	6”/8”/10”
Φ114	4, 5	1”/1.5”/2”/2.5”
Φ159	6, 7	1.5”/2”/2.5”/3”
Φ190	9	2”/2.5”/3”/4”

The diameter of In-outlet under 3” using quick-open, 3” and 4” usingflange. it can customize according to customer's requirements. Dimension anapproximate value, for reference only.

Selection Table

	［Series number］	［No. of magnet］	［Magnet model］	［Shell material］	［In-outlet Connections］	［O-ring］
JTGCX	A	9R	26	4	F	S
	A=Aseries	1R=1pc	206, 208, 210 Example：206, “2” means diameter Φ20mm, “06” means magnetic bar thelength of 6”	4=304	F=flange	E=EPDM
	B=Bseries	4R=4pcs/5pcs		6=316L	K=quick-installed	P=PTFE
	C=Cseries	7R=6pcs/7pcs			L=screwthread	V=Viton
	D=Dseries	9R=9pcs				S=Silicone
	E=Eseries

Online Enquiry

Welcome to send an online inquiry! If you have any suggestions or questions about our products, you can Email us.info@jhenten.com, also feedback through this inquiry; we will reply to you within 24 hours. (Monday to Friday, 9:00-17:30)