Tube Filter Housing

Model: JTGTF

Brand: JHENTEN

Simple Tube Filter

Detail Description

JTGTF Tube Filter Housing is a improved small tube strainer which can remove a small amount of solid particles in the liquid, also can protect compressor, pump, instruments and other equipment to work normally.

JTGTF Tube Filter Housing using multichannel polishing processing to ensure the interface surface roughness Ra≤0.4um,compliance with GMP/FDA requirement . All of the surface is mirror polished.

Feature

The filter inner and outside surface using mirror polish, interface surface roughness Ra≤0.4um,compliance with GMP/FDA requirement .
Filter housing adopts quick connection, easy to handle, economical and practical.

Application
All kinds of liquid particle filtering
Edible oil, beverage, wine filtration
Chemical filter
Compressors, pumps, instrumentation and other equipment pre-filtering and protection.

Surface Finish

Finish Type	Mechanical polishing, electrolytic polishing, sand blasting, pickling
Polishing precision	iInner surface Ra≤0.6μm , Outside surface Ra≤0.8μm.

Operating Conditions

Max Operating Pressure	0.6MPa, 1.0MPa
Max Operating Temp.	150℃

Material

Filter shell	304, 316L
Screen filter	304, 316L
Quick-open	304
O-ring	EPDM, PTFE, Viton, Silicone

Connection

Shell connection	Flange (Eyebolt), Tri-clamp
In-outlet N1, N2	2”/2.5”/3”Tri-clamp

Dimension Parameters	1cartidge：5”Screen filter
	In-outlet 2”	In-outlet2.5”	In-outlet3”
A:Total height (excluding cover andpressure gauge)	621or 833
B:The distance from inlet to center	89	108	127
C:Diameter	Φ129
D:Height from Inlet N1 to filter cover	100

1cartidge：4”Screen filter
In-outlet 2”	In-outlet2.5”
621or 833
89	108
Φ101.6
100

The above-mentioned data is the standard, it can customize according tocustomer's requirements.

Selection Table

	［Qty. of cartridges］	［Model of cartridge］	［Shell material］	［In-outlet Connections］	［Dimension］	［O-ring］
JTGTF	1R	46	4	K	20	E
	1R=1pc	46,48, 56, 58	4=304	F=Flange	20=2”	E=EPDM
		Example:46, “4” means diameter is Φ4, “6” means screen filter length is 600 mm	6=316L	K=Tri-clamp	25=2.5”	P=PTFE
				L=Thread	30=3”	V=Viton
							S=Silicone

PrevBasket Type Filter Housing
NextMagnetic Fluid Filter Housing

Online Enquiry

Welcome to send an online inquiry! If you have any suggestions or questions about our products, you can Email us.info@jhenten.com, also feedback through this inquiry; we will reply to you within 24 hours. (Monday to Friday, 9:00-17:30)